Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterCGI Door Installation: The Coral Gables Owner’s Guide
We install and replace CGI door systems and components throughout Coral Gables, with most door installation work running between $1,800 and $6,500 depending on the model, size, and what’s actually failed. If your CGI door is binding, sagging, or letting in water, we can usually get a technician to your home the same day to diagnose it. Most owners discover the problem the hard way: a door that suddenly won’t latch after a storm, a roller that grinds against the track, or a lower seal that lets a puddle form in the vestibule after every afternoon downpour. You don’t need a degree in door mechanics to know something’s wrong. You just need someone who’s repaired enough CGI doors in Coral Gables to know exactly what it is.
Key takeaways:
- CGI door installation in Coral Gables typically runs $1,800 to $6,500 installed
- We stock common CGI rollers, hinges, seals, tracks, and lock hardware on our trucks
- We’re an independent service provider, not affiliated with CGI itself
- Every installation carries the Done Right Promise from Ed Winslow
Which CGI Models This Applies To
CGI’s impact door line includes the Estate Collection, the Targa series, and their classic French and sliding configurations, plus the heavy-hinged outswing models you see on older Coral Gables estates along Cocoplum and Hammock Oaks. The part compatibility gets specific fast. CGI uses proprietary extrusion profiles, so a hinge or roller from a PGT door won’t always seat correctly in a CGI frame, even when both companies claim “impact-rated.” If you look at the inside edge of the door slab or the top of the hinge stile, you’ll find a small silver or white label with the model number, manufacturing date, and sometimes the Miami-Dade NOA number. That label is your door’s fingerprint. Photos of it help us match parts before we even roll a truck.
When it comes to replacement components, you’ve got two paths: OEM CGI parts or quality aftermarket equivalents. OEM is the safest for anything that touches the impact rating: hinge studs, frame anchors, and the latching hardware. For consumables like weatherstripping, rollers, and interior seals, a well-built aftermarket part can match or sometimes exceed OEM lifespan, especially here where salt air eats uncoated fasteners in about three years. We keep both options on hand and tell you the honest tradeoff before we install anything.
Signs Your CGI Door Installation Is Failing
- Door drags or binds at the bottom corner. This is usually a worn roller or a hinge that’s pulling loose from the frame. In Coral Gables, the high humidity softens the wood shims behind hinges on older homes, which lets the door settle out of square.
- You can see daylight or feel air at the threshold. The bottom sweep or interlocking threshold has compressed. On CGI doors, the sweep is a specific profile, not a generic stick-on strip. A wrong-profile sweep closes the gap but leaks air around the ends.
- The latch won’t catch without lifting the handle. The strike plate has migrated, or the door slab has warped slightly. CGI fiberglass slabs rarely warp, but the multi-point lock rods can bind if the lower rod guide gets gummed with dirt and salt residue.
- Condensation or haze between the glass layers. The insulated glass unit’s seal has failed. On impact glass, once the seal goes, the laminated interlayer is still safe, but the energy performance drops and you’re looking at a full lite replacement, not a repair.
- The door groans or pops when you open it. That’s metal on metal with no lubrication, or a broken roller bearing. Left alone, a seized roller will chew a groove into the track, and then you’re replacing the track too.
Replacement Cost & What’s Included
For Coral Gables specifically, installed pricing breaks down like this:
- Roller or hinge replacement: $180-$340 per door, depending on how many hardware points are worn
- Full door slab replacement (CGI Estate or Targa): $2,400-$4,800 installed, including slab, hardware transfer, and weatherseal
- Full frame-and-slab replacement (out of square or water-damaged frame): $4,200-$6,500, including demo, framing repair, anchoring to Florida code, and finish trim
- Insulated glass lite replacement: $900-$2,200 depending on size and whether it’s a single lite or a full panel
The range comes down to frame condition and what the existing opening gives us to work with. Older Coral Gables homes with original 1950s framing sometimes need new king studs or anchor plates before the new CGI door can meet current wind codes. Our quote is a written line-item price. No vague allowances, no change orders unless we open the wall and find something genuinely hidden. And every installation carries our Done Right Promise. If it’s not right, we come back and make it right. Ed’s name is on the door, and on every job we do.
DIY or Call Us?
There are a few things you can safely check yourself. Clean the track with a dry rag, check that the hinge screws are snug (not overtightened, just snug), and look for obvious tears in the weatherstripping. That’s about where the safe DIY ends. CGI doors are heavy, often 200-plus pounds for an impact-rated slab, and the multi-point hardware is under real tension when the door is in the locked position. A door that comes off its hinges or a slab that tips during removal can do serious damage to you and your threshold. If the problem is anything beyond a loose screw, call us at (904) 478-8983. We’ll diagnose it honestly and tell you if it’s a repair or a replacement. No pressure to buy anything you don’t need.
FAQs
In our coastal climate, you can expect 8 to 12 years from rollers and hinges, 5 to 7 years from weatherstripping, and 15 to 25 years from the slab itself, depending on sun exposure and salt air. West-facing doors on golf course lots wear faster than shaded courtyard entries. If your door is pushing 15 years and has original hardware, it’s worth having us inspect it before the next storm season.
Yes, and that’s usually where we start. Worn rollers, loose hinges, failed seals, and misaligned strikes are all repairable. Replacement only makes sense when the slab is warped, the frame is water-damaged, or the glass seal has failed and you’re looking at a new lite anyway. We’ll show you the difference and quote both options when it’s a judgment call. Call (904) 478-8983 and we’ll walk you through it.
Most roller, hinge, and weatherseal replacements take 45 minutes to two hours. A full slab swap is typically a half-day job. Full frame and slab replacement is a one-day job in most cases, though we may need a second morning for stucco or trim finish on older Coral Gables homes. We’ll give you a written timeline before we start.
Yes. Our trucks carry common CGI rollers, hinges, sweeps, strike hardware, and weatherseal profiles, plus a range of fasteners rated for coastal exposure. For uncommon parts like a specific glass lite or a custom-painted slab, we order OEM and typically have it in hand within 5 to 10 business days, depending on the manufacturer’s lead time. If you’re not sure what you need, send us a photo of the label on your door’s edge and we’ll tell you exactly what we’re looking at.
When you’re ready to get your CGI door working like it should, call us at (904) 478-8983. We answer the phone, we know these doors, and we’re just down the road in Coral Gables. The one down the road.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Coral Gables and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.