Therma-Tru Roof Replacement & Installation Nationwide | Winslow Windows & Doors

Therma-Tru Roof Replacement & Installation in Coral Gables: What to Know First

If you own a home in Coral Gables with Therma-Tru entry doors, roof replacement is a bigger deal than a simple tear-off. Therma-Tru door systems integrate with your roofline in ways that cheap fiberglass units never will, and the flashing details around those openings can make or break a new roof. We’re Winslow Windows & Doors, an independent Therma-Tru service provider, and we’ve handled roof replacements on Coral Gables homes with Therma-Tru door installations since 2011.

Call (904) 478-8983

This page is for the homeowner who wants to know exactly what happens to their Therma-Tru investment when the roof comes off. Not vague promises. Real specifics from the field. Call (904) 478-8983 and you’ll get Ed Winslow or someone who works directly for him.

Key Takeaways

• Therma-Tru doors don’t fail the way cheap doors fail. They fail where roofers cut corners around the rough opening.
• Roof replacement in Coral Gables means dealing with high humidity, salt air, and hurricane tie-down codes that most out-of-town crews don’t understand.
• We coordinate the door trim, flashing, and weatherstripping with your roofing crew so nothing gets overlooked.
• Free estimates. Call (904) 478-8983. Ed’s name is on the door and on every job we do.

How Therma-Tru Products Fail, and How We Fix Them

Twenty years of watching Florida weather beat on entry doors teaches you things. Here’s what actually goes wrong with Therma-Tru installations when roofs get replaced in Coral Gables, and what we do about it.

• Header flashing separation on Classic-Craft and Fiber-Classic units. Therma-Tru doors sit under a substantial header. When a roofer rips off old drip edge and doesn’t re-integrate the door flashing properly, you get water running behind the brickmould and into the rough opening. We see this constantly in Coral Gables after budget roof replacements. Our fix: pull the exterior trim, install proper metal flashing that laps over the new underlayment, and re-secure the brickmould with stainless fasteners. The symptom you’ll notice is a dark water line on the interior drywall above the door casing, usually months after the roof job.
• Swollen jamb legs on Smooth-Star doors in Coral Gables’ humidity. Smooth-Star is Therma-Tru’s fiberglass smooth-skin line. When roofers leave the door exposed to the elements for days mid-job, the jamb absorbs moisture and swells. The door starts sticking at the top corner. We knock the door free, shave the jamb correctly, and replace the weatherstrip. If the jamb is too far gone, we order a genuine Therma-Tru replacement jamb kit. Aftermarket jambs never fit the same.
• Threshold rot on any Therma-Tru model with a wood sub-sill. Older Therma-Tru installations in Coral Gables often used a wood sub-sill under the aluminum threshold. Roof replacement means more water at the entry during the transition period. If that wood goes soft, the threshold rocks. We pull the door, replace the sub-sill with composite, and reset the unit at the correct height for the new roof plane.
• Strike plate misalignment after roof work shakes the frame. A full tear-off is loud, heavy work. Dump trailers in your driveway, roofers walking the ridge, the whole house vibrates. Doors that were perfectly aligned before the roof job start latching hard. On Therma-Tru doors specifically, we adjust the compression of the weatherstripping and reposition the strike plate rather than butchering the jamb. It’s a five-minute fix when you know the system. We know the system.
• Weatherstrip compression set on Pulse and Classic-Craft doors near the coast. Coral Gables salt air does a number on rubber. When we reinstall a Therma-Tru door after roof work, we always check the Q-Lon weatherstrip for compression set. If it’s flattened, we replace it with the correct profile. A door that doesn’t seal tight after a roof replacement means higher AC bills and humid air pushing through the casing gaps. You don’t notice it until the electric bill arrives in August.

Our Therma-Tru Roof Replacement & Installation Process

Here’s how a Winslow job goes when a Therma-Tru door is part of the roof replacement picture in Coral Gables:

1. 1
   Call and schedule the walkthrough. We come out, look at every Therma-Tru opening on the house, and document the condition with photos. You get a written itemized estimate. Not a number on a napkin.
2. 2
   Coordinate with your roofer, or bring our own. If you already have a roofing crew, we work alongside them. If not, we handle the roof replacement ourselves. Either way, the door interfaces are our responsibility.
3. 3
   Pull the brickmould and inspect the rough openings. This is where we find rot, missing flashing, or shoddy original installation. You’ll see photos of what we find. No surprises you didn’t approve.
4. 4
   Re-flash every door opening to the new roof system. We use the correct metal thickness and lap order for Coral Gables wind-driven rain. This is not the place for shortcuts.
5. 5
   Reinstall and tune the door. Weatherstrip checked, threshold leveled, strike plate adjusted. The door closes with one finger. If it doesn’t, we’re not done.
6. 6
   Test and walk away clean. We run water on the door while you watch, then clean up every scrap. Ed’s name is on the job. The Done Right Promise applies to everything we touched.

What Therma-Tru Roof Replacement & Installation Costs in Coral Gables

Roof replacement in Coral Gables runs higher than the state average because of code requirements, tile roof prevalence, and the cost of doing business in a historic district. Here’s what we typically see when Therma-Tru doors are part of the scope:

What moves the price: whether your existing door trim is salvageable, what condition the rough opening is in, and whether you need genuine Therma-Tru replacement components or standard flashing parts. We’ll tell you the difference and let you choose. Call (904) 478-8983 for an exact quote. Estimates are free, and Ed’s name is on every line.

Why Coral Gables Homeowners Call Winslow Windows & Doors for Therma-Tru Work

Ed Winslow grew up in the Coconut Grove area, a few minutes from the Biltmore Hotel. He’s spent his entire working life in South Florida sun, salt air, and hurricane seasons. He studied building construction technology at Miami Dade College and has focused on window and door replacement across Coral Gables for more than two decades. When a Therma-Tru door needs to interface with a new roof, he’s the person neighbors call.

We’re locally owned, owner-operated, and we publish our address and license number. Our technicians are background-checked and arrive in uniform. You know who’s at your door before the truck pulls up. We’re also authorized installers for PGT, CGI, CWS, and ES Windows, which matters when you’re doing a full exterior project and want one crew accountable for everything.

And the Done Right Promise? That’s not marketing. That’s a lasting standard. If it’s not done right, we make it right. Period. We’ve been in business since 2011, and we didn’t get here by walking away from mistakes.

FAQs