Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Mr-Glass Energy-Efficient Windows in Coral Gables: What to Know First
Mr-Glass energy-efficient window service in Coral Gables typically runs $185 to $620 per window depending on the glass package, frame condition, and whether it’s a repair or full sash replacement. Most jobs are completed in a single visit, and we’ll give you a written line-item price before any work starts. If you own Mr-Glass windows and they’re fogging, leaking air, or letting too much South Florida heat through the glass, this page tells you exactly what we see in Coral Gables homes and how we fix it. Call (904) 478-8983 for a free estimate.
This page is for homeowners in Coral Gables, Coconut Grove, South Miami, and the surrounding neighborhoods who bought Mr-Glass windows years ago and want them performing like they should be. We’re an independent Mr-Glass service provider, not a factory warranty center, which matters when you need honest options instead of a scripted upsell.
How Mr-Glass Products Fail - and How We Fix Them
After years of servicing Mr-Glass units across Coral Gables, we know exactly where these windows show their age. Here are the five failure patterns we see most on energy-efficient Mr-Glass installations.
- Seal failure on the Mr-Glass 7000 Series double-pane units. The 7000 Series uses a foam spacer system that was ahead of its time when these sash units shipped, but after 8 to 12 years of Coral Gables humidity and afternoon heat cycling, the desiccant inside the spacer saturates. You’ll see condensation between the panes that never dries. The argon or krypton gas has escaped. We replace the insulated glass unit entirely rather than trying a reseal, because a reseal on a saturated spacer fails again within a season. It’s a parts decision we make based on what we find, not a guess.
- Low-E coating degradation on south-facing Mr-Glass picture windows. Coral Gables homes with unshaded south exposure put relentless UV on the glass. On older Mr-Glass units, the factory low-E coating can start micro-flaking, which looks like a faint haze you can’t clean off. Homeowners often think the glass is just dirty. It’s not. The fix is a new low-E insulated unit, and we’ll match the original tint so the window doesn’t look odd next to its neighbors.
- Failing glazing bead clips on Mr-Glass casement and awning sashes. These are the small plastic clips that hold the glass package into the frame. In Coral Gables salt air, they go brittle and crack, especially within a mile of the water. When a clip lets go, the sash loses its compression seal and air starts moving around the glass edge. We replace the clips with a higher-durometer aftermarket version and reset the glazing tape. This is a $40 to $90 fix that most companies skip because it’s easier to sell a whole new sash.
- Weatherstripping collapse on the Mr-Glass 500 Series sliders. The 500 Series shipped with a felt-and-vinyl hybrid weatherstrip that was never built for Miami-Dade’s UV index. It compresses, then crumbles, and you get daylight visible at the meeting rail. We put in a closed-cell foam replacement that actually recovers its shape. Your air conditioning stops fighting the window, and the room holds temperature the way it should.
- Frame deflection on oversized Mr-Glass fixed units. Big fixed picture windows, especially anything over 48 inches wide, can develop a slight bow in the aluminum frame over years of thermal expansion. That bow breaks the seal at the corners and lets humid Coral Gables air into the air gap. Sometimes it’s repairable with a proper shim and re-clip job; other times the frame is done and a new Mr-Glass-compatible unit is the honest call. We’ll tell you which one applies to your window, and why, before spending your money.
Our Mr-Glass Energy-Efficient Windows Process
- 1
You call (904) 478-8983. A live person answers, day or night. You describe what the window is doing. We book a time that works for you and tell you exactly who will show up.
- 2
We inspect the unit. Our tech arrives in uniform, background-checked, and starts by identifying the Mr-Glass series, the glass package, and the specific failure. We check seal integrity, frame squareness, glazing bead condition, and air movement with a thermal sensing approach on problem units.
- 3
You get a written options list. We walk you through what failed, what the repair costs, and what replacement costs if the unit is beyond saving. No pressure. No mystery numbers later.
- 4
We source the right parts. For units under manufacturer warranty, we point you to that path first. For everything else, we use OEM-equivalent insulated glass units and hardware that match the original spec, because mixing random parts into a Mr-Glass frame creates new problems.
- 5
We do the work and clean up. The sash job, glass swap, or hardware repair gets done in one visit when parts are available locally. We haul the old glass and debris. You don’t touch a thing.
- 6
We test and verify. Before we leave, we check for air leaks, confirm the sash operates correctly, and make sure the new glazing is properly bedded. Every Mr-Glass energy-efficient window job is covered by the Done Right Promise. If it’s not done right, we make it right.
What Mr-Glass Energy-Efficient Windows Costs in Coral Gables
Here’s what we charge in the Coral Gables area for common Mr-Glass energy-efficient window scenarios. These are installed prices, including labor, parts, and haul-away.
- Insulated glass unit replacement (standard double-pane, low-E): $310 to $540 per unit, depending on size and glass package.
- Full sash replacement for Mr-Glass casement or awning windows: $420 to $680 per sash, including low-E glazing and new hardware.
- Weatherstripping replacement for sliding units (per sash): $90 to $170, including removal and new closed-cell foam seal.
- Glazing bead clip replacement and reseal: $40 to $90 per window when no glass replacement is needed.
- Window energy audit for a whole home: $150 to $300, credited toward any work we do from the audit.
What moves the price: glass size, whether the sash has to come out of the frame or can be glazed in place, and whether your Mr-Glass unit has an unusual coating or tint. Salt-air damage near the water in Coral Gables can add frame repair time, which we’ll show you line by line. Call (904) 478-8983 for an exact quote, not an estimate built on a website calculator.
Why Coral Gables Homeowners Call Winslow Windows & Doors for Mr-Glass Work
We’ve been in business since 2011, and Ed Winslow’s name is on the truck. That means the owner is accountable, on every single job. Our techs know Mr-Glass windows because they’ve taken apart enough of them to know what fails, what lasts, and what’s worth repairing versus replacing. We’re not a call center with a rotating cast of subcontractors; we’re a local Coral Gables-area business with a published address and a published license number.
When a Mr-Glass unit is beyond saving, we also install PGT, CGI, CWS, and ES Windows, so you’re not trapped choosing between one brand and a bad fit for your house. You get a straight answer about your options. Every job carries the Done Right Promise, and if you’ve got a written estimate from another company, we’ll give you a free second opinion on it. No trip charge inside our home county.
FAQs
We are an independent Mr-Glass service provider, so we don’t process Mr-Glass warranty claims directly, but we’ll help you determine whether your issue is warranty-covered and advise you on the cleanest path to get it handled. If the warranty won’t cover the work, we’ll give you a fixed price to fix it ourselves. Call (904) 478-8983 and describe the issue; we’ll tell you honestly which route makes sense before you spend a dollar.
Yes, we match the original tint, low-E coating type, and glass thickness on Mr-Glass replacements so the new unit doesn’t stand out from adjacent windows. We take the old unit’s specifications into account before ordering, and we verify the match at installation. If you’re not sure what series or glass package you have, we’ll identify it during inspection.
Repair makes sense when the frame is square, the seals are intact, and the failure is in hardware, weatherstripping, or glazing clips. Replacement is the honest call when the insulating glass unit has lost its seal, the frame is bowed, or the cost of repair approaches 60% of a new unit’s cost. We’ll show you the math on both options and let you decide without a sales pitch. Estimates are free.
Most Mr-Glass energy-efficient window repairs in Coral Gables are scheduled within a few days, and many glass replacements are completed the same day once the unit arrives. We don’t make you wait a week for a callback; a live person answers when you call, and we give you a firm arrival window. If you need the job done before a storm or before a tenant moves in, tell us and we’ll work the schedule hard on your behalf.
No trip charge inside our home county, which includes Coral Gables and the surrounding communities. You’ll know the repair price before we start, and every job gets a written line-item estimate first. Call (904) 478-8983 to set it up.
Written by Ed Winslow, Owner, Winslow Windows & Doors, serving Coral Gables and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After