Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
PGT Shingle, Tile & Metal Roofing in Coral Gables: What to Know First
We provide independent PGT shingle, tile and metal roofing repair and replacement across Coral Gables, typically completing most service calls within one to two days of your first phone call. Pricing stays honest and fixed: you’ll get a written line-item quote before we touch a single fastener, and that number doesn’t move once we start. If you own a PGT roof or PGT roofing components in Coral Gables and something’s leaking, lifting, rusting, or just not draining the way it should, call (904) 478-8983 and a live person picks up.
How PGT Products Fail - and How We Fix Them
PGT builds a strong product, but Coral Gables has its own ideas about what roofing materials should endure. Salt air, afternoon downpours, and hurricane-season wind cycles expose weak points that don’t show up in a showroom. Here’s what we actually see on PGT jobs in Coral Gables:
- PGT metal roof panel seam separation after thermal cycling. Metal expands and contracts dramatically under Coral Gables’ sun-to-storm swings. On PGT standing-seam panels, older mechanical seam locks can open a few millimeters over time, letting water wick underneath. We re-crimp the seam and replace the butyl tape rather than slapping sealant over it, because sealant alone always fails within two seasons.
- Tile underlayment breakdown beneath PGT tile profiles, especially on lower slopes. Tiles themselves rarely wear out. What fails is the self-adhering underlayment underneath. We see it most on Coral Gables homes with wide overhangs and slow drainage. We lift the affected tiles, cut out the degraded underlayment, and reinstall with a fresh peel-and-stick layer before resetting the tile. Skipping the underlayment step is a cheap repair we refuse to do because it fails and you pay twice.
- Fastener backout on PGT shingle systems near roof edges. Edge rows catch the most wind uplift. On some PGT shingle installations we replace nails that have pulled up roughly a quarter inch, which is enough to let wind-driven rain slide beneath the shingle. Our fix is removing and replacing with ring-shank fasteners, not hammering the old nail back down where it will back out again.
- Flashing failures where PGT metal roof panels meet chimney and skylight penetrations. This is the number one call we get after a Coral Gables thunderstorm. The panel-to-flashing transition is exactly where aftermarket or improvised flashing loses its seal. We fabricate and install proper two-piece step flashing under the PGT panel and over the penetration, with a corrosion-resistant sealant appropriate for the metal profile.
- Condensation staining on PGT tile roof decking in older Coral Gables homes without ridge ventilation. Tile holds moisture longer than shingle after a rain. Without proper ventilation, humid air condenses on the underside of the decking and stains ceilings. We check ridge and soffit ventilation first, because repairing the decking without fixing airflow just moves the stain to a different room.
Our PGT Shingle, Tile & Metal Roofing Process
Every PGT roofing job follows the same path, and none of it involves surprises on the invoice:
- 1
You call. A live person answers, 24/7. No voicemail loop, no call center. You describe what you’re seeing, we schedule a visit.
- 2
We inspect. Our technician walks the roof or the specific problem area, documents what’s failing with photos, and explains what’s happening in plain language.
- 3
You get a written quote. Every job gets a line-item estimate. PGT repairs, replacement materials, fasteners, labor… it’s all listed. No lump-sum mystery.
- 4
We fix it with the right parts. Where PGT OEM materials are needed and available, we use them. Where a quality aftermarket component is equal or better for the specific application, we tell you before we install it and explain why. Nothing gets substituted silently.
- 5
We test before we leave. If it’s a leak, we water-test. If it’s a material replacement, we check alignment and drainage. We walk the entire surrounding area to make sure the repair didn’t disturb anything else.
- 6
You get the Done Right Promise. If it’s not done right, we come back and make it right. Ed’s name is on the door, and on every job we do.
What PGT Shingle, Tile & Metal Roofing Costs in Coral Gables
Here’s what we see across Coral Gables for common PGT roofing scenarios. These are real ranges, not bait numbers:
- Minor PGT shingle or tile repair (a few shingles, a cracked tile, small flashing fix): $325 to $650
- PGT metal roof panel seam repair (re-crimp plus sealant on one to three seams): $400 to $800
- Tile underlayment replacement under a section of PGT tile (roughly 100 square feet): $1,400 to $2,300
- Full penetration re-flashing around a chimney or skylight on a PGT roof: $600 to $1,200 per penetration
- Major PGT roof section replacement (250 square feet of shingle, tile, or metal): $3,500 to $7,800 depending on material and decking condition
What moves the price? Decking repair underneath, the number of penetrations, whether we’re matching existing PGT product versus replacing a section, and how accessible your roof is on a Coral Gables lot. You get the exact number in writing before we start. Call (904) 478-8983 for a free estimate.
Why Coral Gables Homeowners Call Winslow Windows & Doors for PGT Work
Ed Winslow grew up in Coconut Grove, a few minutes from the Biltmore Hotel, and has spent more than two decades working in South Florida’s sun, salt air, and storm seasons. The Done Right Promise isn’t a slogan. It’s a standard of accountability no national chain can match. If it’s not done right, we come back. That’s it. Our technicians are background-checked and uniformed, so you know exactly who’s on your roof before the truck parks. We’re also authorized installers for CGI, CWS, ES Windows, and ECO Window Systems, which means when a Coral Gables homeowner has a mixed-brand home, we handle the whole exterior without passing you between three different companies. One call, one accountable team, one owner who answers.
FAQs
As an independent PGT service provider, we follow warranty-safe repair practices on every job. That means we don’t install aftermarket components where PGT specifies OEM, we don’t modify the roof structure in ways that fall outside manufacturer installation guidelines, and we document everything. If your PGT product is still under warranty, the safest path in Coral Gables is usually a repair that preserves the original installation rather than a full tear-out. Call (904) 478-8983 and we’ll check your specific situation before any work is quoted.
Most Coral Gables PGT roofing service calls are completed within one to two days of your first call. A live person answers our phone 24/7, which means you never wait until Monday morning to speak with someone about water coming through your ceiling. For exact scheduling, call (904) 478-8983.
Where PGT OEM components are available and necessary for the repair, we use them. Where a quality aftermarket part is equal or better for the specific application, we show you both options, explain the trade-off in cost and longevity, and let you decide before anything is ordered. No silent substitutions, ever.
That depends on the age of the roof, the number of previous repairs, and whether the failure is isolated or systemic. If the damage is limited to a specific area and the roof is under 15 years old, repair usually makes sense. If you’re chasing the same leak for the third time or the decking is soft in multiple spots, replacement becomes the more honest answer. We’ll give you a straight recommendation, not the one that pads the invoice.
Yes, when the scope of work requires one under Coral Gables building codes, we pull the permit, complete the work, and pass the inspection. If a repair is small enough that a permit isn’t required, we tell you that too. No permit games. Call (904) 478-8983 for an exact quote on your PGT roofing job.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Coral Gables and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.










Before
After
Before
After
Before
After