Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Before
After
Before
After
Before
AfterTherma-Tru Custom & Geometric Windows in Coral Gables: What to Know First
We install and service Therma-Tru custom and geometric windows throughout Coral Gables, including arched, radius, oval, and oversized openings. Most custom-shape Therma-Tru projects run from two to six weeks from template to install, and we provide upfront line-item pricing before we cut the first piece of glass. If you own a Therma-Tru window in Coral Gables and it’s fogged, warped, or leaking around a curved frame, call (904) 478-8983. This page is for Coral Gables homeowners who want straight answers about their Therma-Tru windows – what fails, what it costs, and what we do differently.
How Therma-Tru Products Fail – and How We Fix Them
Therma-Tru builds a solid product, but Coral Gables heat, humidity, and hurricane cycles expose weak points in their custom geometric lines faster than in their standard rectangles. Here’s what we see most often on service calls between the Biltmore and Gables by the Sea:
- Fogged insulating glass in Therma-Tru’s geometric shapes. Arched and radius windows put uneven stress on the seal where curved glass meets the frame. In Coral Gables, where afternoon temperatures climb past 90 and humidity sits above 70 percent, that seal flexes and fails faster than a flat window. We see fogging in Therma-Tru radius units as early as year seven or eight. The fix is a new custom-cut insulated glass unit matched to the original curve – and we template every arch by hand before ordering, because a quarter-inch miss means the sash will never seat right.
- Frame rot at the base of decorative half-rounds and eyebrow windows. Weathered-in Therma-Tru wood-composite shapes collect water at the sill where the curve meets flat jamb. If the flashing was even slightly off, or the weep holes got painted over, water sits there. In a climate that averages 60 inches of rain a year, that’s a slow decay problem. We remove the rotted section, rebuild it with rot-resistant material, and re-seal with a marine-grade caulk that holds up in salt air.
- Sash misalignment in oversized geometric openings. A 6-foot radius or oversized octagon carries more glass weight than the hinge hardware was designed to handle if the rough opening settled even a hair. Coral Gables sits on oolitic limestone, and houses shift. The symptom is a window that won’t close fully on the curved side. We re-shim, re-square, and replace worn hinges – sometimes with upgraded stainless hardware that stands up better to coastal air than factory zinc.
- Clouded glass in Therma-Tru’s obscure and decorative geometric lines. If you have a beveled, leaded, or textured geometric window, the custom glass is often the first thing to go. Therma-Tru doesn’t keep every decorative pattern in production forever, so when a window fails, we work with specialty glass suppliers who can reproduce the texture and bevel. It’s one of the few times you’ll hear us recommend aftermarket over OEM, because matching the original look matters more than matching the part number.
- Leaking at the seam where a geometric transom meets the main window below. In Coral Gables, driving rain hits these seams at angles flat windows never experience. The original gasket compresses, dries out, and shrinks. We replace it with a compression gasket cut to the exact radius and verify the drainage channels are clear before we finish the job. Skipping that second step is how leaks come back a month later.
Our Therma-Tru Custom & Geometric Windows Process
Every Therma-Tru job in Coral Gables follows the same path, whether it’s a small repair or a full replacement of an arched window package:
- 1
Call and talk to a real person. When you call (904) 478-8983, someone picks up. We ask where you live, what shape the window is, and what’s going wrong. If you’re in our home county, there’s no trip charge.
- 2
On-site inspection and measurement. We come out, measure everything twice, and check the rough opening, the flashing, and the condition of the frame. For custom shapes, we template the curve on site. That prevents expensive ordering errors.
- 3
Upfront pricing. You get a written, line-item estimate before any work starts. Not a ballpark. Not a hand-wave. The number we quote is the number you’ll pay.
- 4
Parts decision. We tell you when OEM Therma-Tru parts are worth the premium and when a quality aftermarket alternative will perform better for less. You decide. We stand behind either choice.
- 5
Install or repair. Background-checked, uniformed technicians do the work. We protect your floors, remove the old unit cleanly, and set the new one square and level.
- 6
Test and walk-through. We run water tests on the exterior, operate the window several times, and walk you through what we did. If it’s not done right, the Done Right Promise means we come back and make it right. Every job, every time.
What Therma-Tru Custom & Geometric Windows Costs in Coral Gables
Here’s what we tell Coral Gables homeowners to expect, based on years of Therma-Tru work in Gables Estates, Cocoplum, Snapper Creek, and the neighborhoods around Miracle Mile:
| Scope | Typical Coral Gables Range |
|---|---|
| Reseal a leaking geometric window | $180 – $400 |
| Replace fogged glass in one arched or radius unit | $450 – $950 |
| Rebuild rotted frame section | $300 – $800 |
| Replace a standard-size Therma-Tru geometric window | $1,400 – $3,200 installed |
| Replace an oversized or custom radius window | $3,500 – $7,500 installed |
Glass size, curve complexity, frame material, and whether the opening needs structural work all move the number. You’ll also see a permanent $40 credit on any repair over $200, and seniors and veterans get 10 percent off every job. Call (904) 478-8983 for a free written estimate – no pressure, no vague ranges.
Why Coral Gables Homeowners Call Winslow Windows & Doors for Therma-Tru Work
We’ve been at this since 2011, and Ed Winslow – the owner whose name is on the truck – grew up in Coconut Grove and studied building construction technology at Miami Dade College. He spent more than two decades replacing windows and doors across Coral Gables before most national chains had a local crew worth calling. We know what salt air does to hardware, what limestone soil does to rough openings, and what hurricane code means for a 6-foot radius window facing the bay. If we’re working on your Therma-Tru and recommend a replacement from PGT, CGI, CWS, or ES Windows instead, it’s because the numbers support it – not because we get a better margin. And every job carries the Done Right Promise. Ed’s name is on the door – and on every job we do.
FAQs
No, provided the work is done by a competent glass or window contractor. As an independent Therma-Tru service provider, we’re careful to use components that meet or exceed the original specifications. If your window is still under the manufacturer’s coverage, we’ll tell you before touching it – sometimes a warranty claim is the right move, and we’ll help you file it correctly.
Yes. We template the existing opening and match the glass curve, frame color, grid pattern, and texture as closely as current manufacturing allows. For discontinued decorative glass patterns, we work with specialty suppliers who can replicate the original look. Most Coral Gables homeowners can’t pick the new unit out of the line-up when we’re done.
A single custom geometric window typically takes two to six weeks from template to installation, depending on glass availability and curve complexity. Repairs – resealing, glass replacement in stock shapes, hinge replacement – are usually done in one visit. Call (904) 478-8983 and we’ll give you a realistic timeline for your specific window.
If the frame is sound, repairing is almost always cheaper – fogged glass replacement runs $450 to $950, while full replacement starts around $1,400. But if the frame is rotted, the hardware is failing, or the window is over 15 years old, replacement often costs less over the next decade. We’ll show you both numbers and give you our honest read. The estimate is free either way.
Yes, when the job requires one. Coral Gables has specific requirements for window replacement, particularly for impact-rated units, and we handle the permit process, the inspections, and the final sign-off. It’s included in our price – not a surprise line item at the end.
If you’ve got a Therma-Tru geometric window acting up, or you’re planning to replace a set of arched windows in Coral Gables, call (904) 478-8983. You’ll get a real person, an honest assessment, and a free written estimate. We’re the one down the road.
Written by Ed Winslow, Owner, Winslow Windows & Doors at Winslow Windows & Doors, serving Coral Gables and nearby areas.
Six Reasons Homeowners Choose Winslow Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.